- Guaranteed Secure Payments on Every Order
- Refund if your item is not delivered or as described
- Buyer Protection after order confirmation
- Place of Origin: China
- Brand Name: Hydraulic Co., Ltd. Qidong City, Texas
- Model Number: A2FM
- Weight: 25.000 kg
A2FM quantitative pump
6 series, for open and closed loop oblique axial tapered piston element
Specification 5-180
Nominal pressure 400 Mpa spike pressure 450 Mpa
The axial plunger motor of the tapered A2FM inclined shaft type, suitable for open and closed loop hydrostatic transmission.
The output speed is proportional to the input flow rate and is inversely proportional to the displacement. The driving torque increases with the increase of the pressure drop at the high and the low pressure side.
The motor is suitable for walking machinery and industrial applications.
Complete specifications, can be used to match a variety of applications.
--- good power / weight ratio
- element size is small
Best efficiency
Economic design
Piston ring for sealing the overall cone piston
Patented cylinder drive system
Working pressure
The maximum pressure of oil port A or B
Shaft extension Z axis extension B, A, P axis extension Z, P
(radial force at the end of the shaft)
Rated pressure 40Mpa 35Mpa PN 31.5 Mpa
Maximum pressure 45Mpa 40Mpa Pmax 35 Mpa
A and B import and export of the pressure and does not allow more than 70 Mpa.
Oil port A or B minimum inlet pressure
Mpa Pmin=0.2~0.6 (closed loop pump operating conditions)
Shell drain pressure (oil port T)
PT = 0.1Mpa
Working medium
Mineral oil can be used
Oil temperature
Operating temperature range: -25 to 80
Oil viscosity
The best viscosity: 16 ~ 36m (/s square meters in the operating temperature range)
The maximum allowable viscosity: 1000m square meters /s (instantaneous running in the cold start)
The minimum allowable viscosity: 10M square meters (/s in the leakage of the oil temperature is 90 degrees centigrade instantaneous operation)
Oil filtration accuracy
Recommended filter accuracy of 10 M filter, the most crude shall not exceed 25 m accuracy.
Installation location
Optional, the shell must always be filled with hydraulic oil.
Oil flow direction
From the end of the axis to observe the clockwise rotation of A to B
Counter clockwise rotation B / A
Speed range
The minimum speed is not limited, if the requirements of uniform rotation, then the minimum speed min n > 50r/min. See technical data sheet.
Product quality is stable, price concessions, please call or email!
E-mail: 643921642qq.com
Cell phone: 0086-18962820125
A2FM定量泵 | |
规格10-180 | 公称压力400 Mpa 尖峰压力450 Mpa |
这种斜轴式的轴向锥形柱塞A2FM马达,适合于开式和闭式静液压传动回路。 输出转速与输入流量成正比而与排量成反比。驱动扭矩随着高压侧和低压侧的压降的加大而增大。 规格齐全,可方便地与各种应用场合相匹配。 ---良好的功率/重量比 ---元件尺寸小 ---最佳效率 ---经济的设计 ---整体锥形柱塞带有用于密封的活塞环 ---专利性的缸体驱动系统 |
工作压力 油口A或B的最高压力 轴伸A 轴伸Z、B、P 轴伸Z、P (轴端有径向力) 额定压力PN 40Mpa 35Mpa 31.5 Mpa 最高压力Pmax 45Mpa 40Mpa 35 Mpa A和B进出油口的压力之和不允许超过70 Mpa。 油口A或B的最低进口压力 Pmin=0.2~0.6 Mpa (闭式回路泵工况) 壳体泄油压力(油口T) PT≤0.1Mpa 工作介质 矿物油基本都可选用 油液温度 工作温度范围:-25℃~80℃ 油液粘度 最佳工作粘度:16~36m㎡/s(在工作温度范围内) 最小允许粘度:10m㎡/s(在泄漏油温度为90℃时瞬时运行) 油液过滤精度 推荐过滤精度为10μm的滤油器,最粗不得超过25μm的精度。 安装位置 任选,壳体内必须始终充满液压油。 油流方向 从轴端观察 顺时针旋转A→B 逆时针旋转B→A 转速范围 最低转速不限,如果要求匀速旋转,则最低转速n min>50r/min。最高转速见技术数据表。 |
因产品型号规格较多,请务必核对清楚,在备注中完整写明!
小批量订货正常交货期为1~3天,批量大时需先确认交货期!
产品质量稳定,价格优惠,欢迎致电或邮箱咨询!
邮箱:643921642@qq.com
手机: 0086-18962820125
- Place of Origin: China
- Brand Name: Hydraulic Co., Ltd. Qidong City, Texas
- Model Number: A2FM
- Weight: 25.000 kg
A2FM quantitative pump
6 series, for open and closed loop oblique axial tapered piston element
Specification 5-180
Nominal pressure 400 Mpa spike pressure 450 Mpa
The axial plunger motor of the tapered A2FM inclined shaft type, suitable for open and closed loop hydrostatic transmission.
The output speed is proportional to the input flow rate and is inversely proportional to the displacement. The driving torque increases with the increase of the pressure drop at the high and the low pressure side.
The motor is suitable for walking machinery and industrial applications.
Complete specifications, can be used to match a variety of applications.
--- good power / weight ratio
- element size is small
Best efficiency
Economic design
Piston ring for sealing the overall cone piston
Patented cylinder drive system
Working pressure
The maximum pressure of oil port A or B
Shaft extension Z axis extension B, A, P axis extension Z, P
(radial force at the end of the shaft)
Rated pressure 40Mpa 35Mpa PN 31.5 Mpa
Maximum pressure 45Mpa 40Mpa Pmax 35 Mpa
A and B import and export of the pressure and does not allow more than 70 Mpa.
Oil port A or B minimum inlet pressure
Mpa Pmin=0.2~0.6 (closed loop pump operating conditions)
Shell drain pressure (oil port T)
PT = 0.1Mpa
Working medium
Mineral oil can be used
Oil temperature
Operating temperature range: -25 to 80
Oil viscosity
The best viscosity: 16 ~ 36m (/s square meters in the operating temperature range)
The maximum allowable viscosity: 1000m square meters /s (instantaneous running in the cold start)
The minimum allowable viscosity: 10M square meters (/s in the leakage of the oil temperature is 90 degrees centigrade instantaneous operation)
Oil filtration accuracy
Recommended filter accuracy of 10 M filter, the most crude shall not exceed 25 m accuracy.
Installation location
Optional, the shell must always be filled with hydraulic oil.
Oil flow direction
From the end of the axis to observe the clockwise rotation of A to B
Counter clockwise rotation B / A
Speed range
The minimum speed is not limited, if the requirements of uniform rotation, then the minimum speed min n > 50r/min. See technical data sheet.
Product quality is stable, price concessions, please call or email!
E-mail: 643921642qq.com
Cell phone: 0086-18962820125
A2FM定量泵 | |
规格10-180 | 公称压力400 Mpa 尖峰压力450 Mpa |
这种斜轴式的轴向锥形柱塞A2FM马达,适合于开式和闭式静液压传动回路。 输出转速与输入流量成正比而与排量成反比。驱动扭矩随着高压侧和低压侧的压降的加大而增大。 规格齐全,可方便地与各种应用场合相匹配。 ---良好的功率/重量比 ---元件尺寸小 ---最佳效率 ---经济的设计 ---整体锥形柱塞带有用于密封的活塞环 ---专利性的缸体驱动系统 |
工作压力 油口A或B的最高压力 轴伸A 轴伸Z、B、P 轴伸Z、P (轴端有径向力) 额定压力PN 40Mpa 35Mpa 31.5 Mpa 最高压力Pmax 45Mpa 40Mpa 35 Mpa A和B进出油口的压力之和不允许超过70 Mpa。 油口A或B的最低进口压力 Pmin=0.2~0.6 Mpa (闭式回路泵工况) 壳体泄油压力(油口T) PT≤0.1Mpa 工作介质 矿物油基本都可选用 油液温度 工作温度范围:-25℃~80℃ 油液粘度 最佳工作粘度:16~36m㎡/s(在工作温度范围内) 最小允许粘度:10m㎡/s(在泄漏油温度为90℃时瞬时运行) 油液过滤精度 推荐过滤精度为10μm的滤油器,最粗不得超过25μm的精度。 安装位置 任选,壳体内必须始终充满液压油。 油流方向 从轴端观察 顺时针旋转A→B 逆时针旋转B→A 转速范围 最低转速不限,如果要求匀速旋转,则最低转速n min>50r/min。最高转速见技术数据表。 |
因产品型号规格较多,请务必核对清楚,在备注中完整写明!
小批量订货正常交货期为1~3天,批量大时需先确认交货期!
产品质量稳定,价格优惠,欢迎致电或邮箱咨询!
邮箱:643921642@qq.com
手机: 0086-18962820125